• s Maintenance-free,

self-lubricating High strength under impact loads High tensile strength Compensation...

Description

• igubal® rod ends

igubal® Rod Ends Maintenance-free,

self-lubricating High strength under impact loads High tensile strength Compensation of misalignment Compensation of edge loads Very low weight

• igubal® rod ends
• igubal® Rod Ends

igubal® rod ends can also be used in rough environments.

They are corrosion-resistant in humid environments and resistant to weak acids and bases.

The operation temperature is from –40 °C up to +80 °C.

Rod ends are also insensitive to dirt and dust.

Maintenance-free,  dry-running

High strength  under impact loads

High tensile strength

Compensation  of misalignment Compensation of  edge loads

When to use it

? If you want to save weight To realise rotating,

oscillating and linear movements If high-frequency oscillations/vibrations preponderance If silent run is required If you need an electrical insulating article If corrosion resistance is required In combination with pneumatic cylinders and gas pressure springs If chemical resistance is required If high stiffness is requested

When not to use it

? If temperatures are higher than +80 °C HT version,

page 578–579 If rotation speeds higher than 0.5 m/s are required If really high tensile and transverse loads prevail If applications with hydraulic cylinders should be realised If dimensions above 30 mm are necessary

Low weight

Temperature +80º

+200º

• –30º
• –40º

Standard

Product range

More information

• 18 types Ø 2–30 mm

High temperature

• www.igus.eu/rod-end

igubal® Rod Ends | Application Examples

• igubal® rod ends

Typical sectors of industry and application areas Bicycle manufacturing Plant construction Packaging Offshore etc.

Improve technology and reduce costs – 110 exciting examples online

www.igus.eu/igubal-applications

• www.igus.eu/special-bikes
• www.igus.eu/textile
• www.igus-packaging.eu
• www.igus.eu/offshore

igus® GmbH Cologne  |  Phone +49 (0) 22 03-9649-145 Fax

• -334  |  [email protected]  |  www.igus.eu
• igubal® rod ends

igubal® Rod Ends | Technical Data

Advantages Maintenance-free High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt,

dust and lint Corrosion- and chemical-resistant High vibration-dampening Suitable for rotating,

oscillating and linear movements Light weight Dimensional series K and E,

according to standard DIN ISO 12240 Available with a metal sleeve to take a higher torque

Loads igubal® rod ends handle high loads at normal room temperatures,

have excellent dampening properties and weigh only a fifth of traditional metallic rod ends.

In applications with high continuous loads and high temperatures,

the load capacity of igubal® rod ends should be tested in an experiment that simulates the application.

Coefficients of Friction and Speed One important advantage of igubal® spherical bearings is that rapid,

rotary movements of a mounted shaft take place directly between the shaft and the iglidur® plain spherical bearing.

In metallic rod ends,

rotary motion takes place between the race and the spherical bearing.

High speeds can be achieved with igubal® bearings.

Product Range igubal® rod ends are available in the dimensional series K and E for shaft diameters of 2 to 30 mm.

Form A – with male thread and Form B – with female thread The dimensional series K and partially E are available in imperial dimensions,

as well as a special version containing a stainless steel sleeve in the inner race.

This allows a significantly higher torque than for the standard polymer race.

Please ask us for more dimensons.

Temperatures Series E (types A+B) for temperatures up to +200 °C  (HT material).

Tolerances igubal ® rod ends can be used at different tolerances depending on the individual application.

In standard form,

they are designed with a large amount of bearing clearance,

which permits reliable operation even at high rotational speeds.

The bore of the inner race is produced to a standard tolerance range.

Shafts should also meet recommended tolerances.

Please contact us if you have any questions regarding tolerances.

Pivot angle

• 564 Lifetime calculation,

CAD files and much more support

• www.igus.eu/rod-end
• igubal® rod ends

igubal® Rod Ends | Product Overview igubal® rod ends with female thread

KBRM/KBLM Series K  Standard design (metal insert optional) from page 566

KBRM CL KBLM CL Series K with lock nut (metal insert optional) page 568

KBRI/KBLI

EBRI/EBLI

Series K Version with   inch dimensions from page 580

Series E Version with   inch dimensions from page 584

KCRM/KCLM

EBRM/EBLM

Series K (metal insert optional)

Series E

• page 569

EBRM HT/ EBLM HT Series E High temperature

• from page 574
• page 578

igubal® rod ends with male thread

KARM/KALM

KARM CL

EARM/EALM

Series K Standard design (metal insert optional)

Series K 2nd generation (metal insert optional)

Series E

• from page 570
• page 572

EARM HT/ EALM HT Series E High temperature

• from page 576
• page 579

KARI/KALI Series K Version with   inch dimensions from page 582

igubal® accessories for rod ends

PKRM/PKLM Series K Adapter bolt   with circlip page 590

GERMK/GELMK GERMF/ Series E GELMF Series E page 598

• page 599

WGRM/ WGLM

WGRM-LC WGLM-LC

AGRM AGLM

AGRM-LC AGLM-LC

Angle joint

Low-cost Angle joint page 587

Axial joint

Low-cost Axial joint page 589

• page 586
• page 588

igus® GmbH Cologne  |  Phone +49 (0) 22 03-9649-145 Fax

• -334  |  [email protected]  |  www.igus.eu
• igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with female thread: KBRM and KBLM

Standard design

Maintenance-free,

self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt,

dust and lint Corrosion- and chemical-resistant High vibration-dampening Suitable for rotating,

oscillating and linear movements Very low weight Dimensional series K according to standard DIN ISO 12240 Available with a metal sleeve for a higher torque

Design with metal sleeve (MH)

Technical Data Part number

• static tensile strength
• static radial load
• torque thread strength depth
• torque through ball

Long term [N]

Short term [N]

Long term [N]

Thread

Inner threading

• thread

Short term [N]

KBLM-02

• 100 250 250 400 700
• 50 125 125 200 350

5 7 7 8 11

• 0.50 0.75 1.00 1.50 5.00
• 2 5 5 10 12
• 4 12 12 15 40
• 2.7 3.5 3.4 4.7 8.6
• 800 800 900 900 1,000 1,300 1,300 1,600 2,100 2,100 2,200 2,300 2,500 2,500
• 400 400 450 450 500 650 650 800 1,050 1,050 1,100 1,150 1,250 1,250
• 13 13 15 15 17 19 19 21 22 22 25 28 34 34
• 15.00 6.00 20.00 15.00 25.00 30.00 27.50 45.00 60.00 60.00 75.00 120.00 135.00 135.00
• 20 20 30 30 35 40 40 45 55 55 60 60 60 60
• 50 50 70 70 75 110 110 150 200 200 – – – –
• 14.6 14.6 22 22 30.9 39.6 39.6 55 73.5 73.5 94.8 119.8 177 189.6

Right-hand

Left-hand

• thread

KBRM-02

KBRM-03 KBLM-03 800 400 KBRM-05 M4 KBLM-05 M4 1,000 500 KBRM-05 KBLM-05 1,000 500 KBRM-06 KBLM-06 1,400 700 KBRM-08 KBLM-08 2,100 1,050 KBRM-10 KBLM-10 3,100 1,550 KBRM-10 F KBLM-10 F 3,100 1,550 KBRM-12 KBLM-12 3,600 1,800 KBRM-12 F KBLM-12 F 3,600 1,800 KBRM-14 KBLM-14 4,000 2,000 KBRM-16 KBLM-16 4,200 2,100 KBRM-16 F KBLM-16 F 4,200 2,100 KBRM-18 KBLM-18 4,600 2,300 KBRM-20 KBLM-20 5,400 2,700 KBRM-20 M20 KBLM-20 M20 5,400 2,700 KBRM-22 KBLM-22 7,000 3,500 KBRM-25 KBLM-25 8,500 4,250 KBRM-30 KBLM-30 10,500 5,250 KBRM-30 M27x2 KBLM-30 M27x2 10,500 5,250

• 566 Lifetime calculation,

CAD files and much more support

Standard Standard without MH with MH [Nm] [Nm]

Weight

• www.igus.eu/rod-end
• igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: KBRM and KBLM B

Order key

KB…M-02

Dimension Metric Thread L'= left-hand thread R = right-hand thread Housing (female thread) Series

d4 d5

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 657

Dimensions [mm] Part number

d1 d2

E10 Right-hand

Left-hand

• thread
• thread

KBRM-02 KBLM-02 KBRM-03 KBLM-03 KBRM-05 M4 KBLM-05 M4 KBRM-05 KBLM-05 KBRM-06 KBLM-06 KBRM-08 KBLM-08 KBRM-10 KBLM-10 KBRM-10 F KBLM-10 F KBRM-12 KBLM-12 KBRM-12 F KBLM-12 F KBRM-14 KBLM-14 KBRM-16 KBLM-16 KBRM-16 F KBLM-16 F KBRM-18 KBLM-18 KBRM-20 KBLM-20 KBRM-20 M20 KBLM-20 M20 KBRM-22 KBLM-22 KBRM-25 KBLM-25 KBRM-30 KBLM-30 KBRM-30 M27x2KBLM-30 M27x2

h1 l1

• pivot angle
• without with MH MH ±0,2
• 02 9 03 13 05 18 05 06 08 10 10 12 12 14 16 16 18 20 20 22 25 30 30

M02 M03 M04

• 4,0 4,6 6,5 8,0 9,0 12,0
• 3,0 4,5 6,0

4 6 8

• 4,1 12,5 6 6,1 18,5 7 8,1 27 10

17 25 36

SW04 SW06 SW09

• 30° 30° 30°
• 18 M05 9,0 12,0 6,0 20 M06 10,0 13,0 7,0 24 M08 13,0 16,0 9,0 30 M10 15,0 19,0 10,5 30 M10 x 1,25 15,0 19,0 10,5 34 M12 18,0 22,0 12,0 34 M12 x 1,25 18,0 22,0 12,0 38 M14 20,0 25,0 13,5 42 M16 22,0 27,0 15,0 42 M16 x 1,5 22,0 27,0 15,0 46 M18 x 1,5 25,0 31,0 16,5 50 M20 x 1,5 28,0 34,0 18,0 50 M20 x 2,5 28,0 34,0 18,0 56 M22 x 1,5 30,0 37,0 20,0 60 M24 x 2,0 32,0 41,0 22,0 70 M30 x 2,0 37,0 50,0 25,0 70 M27 x 2,0 37,0 50,0 25,0
• 8 9 12 14 14 16 16 19 21 21 23 25 25 28 31 37 37
• 8,1 9,2 12,2 14,2 14,2 16,2 16,2 19,2 21,2 21,2 23,2 25,3 25,3 – – – –
• 36 40 48 58 58 67 67 76 85 85 94 102 102 112 124 145 145

SW09 SW11 SW14 SW17 SW17 SW19 SW19 SW22 SW22 SW22 SW27 SW30 SW30 SW32 SW36 SW41 SW41

• 30° 29° 25° 25° 25° 25° 25° 25° 23° 23° 23° 23° 23° 22° 22° 22° 22°
• 27 30 36 43 43 50 50 57 64 64 71 77 77 84 94 110 110
• 10 12 16 20 20 22 22 25 28 28 32 33 33 37 42 50 50

For rod ends with metal insert please add MH to the part number,

• e. g.

KRBM-10 MH (Inner-Ø: 10 mm).

• delivery from stock time

prices price list online www.igus.eu/eu/kbrm

igus® GmbH Cologne  |  Phone +49 (0) 22 03-9649-145 Fax

• -334  |  [email protected]  |  www.igus.eu
• igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends,

• female thread
• 2nd generation: KBRM CL and KBLM CL B

Order key

KB…M-06 CL l2

• 2nd Generation Dimension Metric Thread L'= left-hand thread R = right-hand thread Housing (female thread) Series

Smooth design has no dirt traps Compensation of misalignment Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Dimensional series K according to standard DIN ISO 12240

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 657 More spherical ball material on request   page 653

Technical Data Part number

• static tensile strength

Right-hand

Left-hand

• thread
• thread

KBRM-06 CL KBRM-08 CL KBRM-10 CL

KBLM-06 CL KBLM-08 CL KBLM-10 CL

• static radial load

Short term [N]

Long term [N]

Short term [N]

Long term [N]

• 1,400 2,100 3,100
• 700 1,050 1,550
• 300 500 800
• 150 250 400

torque thread strength depth Inner Thread [mm]

• threading [Nm]

8 11 13

• 0.75 2.0 3.0
• torque through ball

Weight

Standard Standard without MH with MH [Nm] [Nm]

10 12 20

15 40 50

• 4.5 8.6 14.1

Dimensions [mm] Part number

E10 Right-hand

Left-hand

• thread
• thread

B without MH

• pivot angle

MH ±0,2

KBRM-06 CL KBLM-06 CL 06 20 M06 SW10 9 9,2 7 40 36,5 30 20 46,5 5,7 40° KBRM-08 CL KBLM-08 CL 08 24 M08 SW13 12 12,2 9 48 44,3 36 25 56,3 7,5 35° KBRM-10 CL KBLM-10 CL 10 30 M10 SW15 14 14,2 10,5 58 52,2 43 30 67,2 8,4 35° Rod ends can be ordered in metric dimensions with metal insert with the addition of MH after the part numbers listed here Part numbern,

• e. g.

KBRM-10 CL MH (Inner-Ø: 10 mm).

For another spherical bearing material than iglidur® W300,

please add J or R to the part number,

• e. g.

KBRM-10 CL J.

Spherical ball material to choose RKM: low-cost

page 653 JKM: Low moisture absorption

W300: standard spherical bearing with metal sleeve

• 568 Lifetime calculation,

CAD files and much more support

• www.igus.eu/rod-end
• igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: KCRM and KCLM B

Order key d1

KC...M-06

Dimension Metric Thread L'= left-hand thread R = right-hand thread Housing (female thread) Series

• d3 W Smooth design has no dirt traps Spherical ball is clipped in Choice of iglidur® ball materials Compensation of misalignment Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Dimensional series K according to standard DIN ISO 12240

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 657 More spherical ball material on request   page 653

Technical Data Part number

• static tensile strength

Right-hand

Left-hand

• thread
• thread

KCRM-06 KCRM-08 KCRM-10

KCLM-06 KCLM-08 KCLM-10

• static radial load
• torque strength
• torque through balls

Short term Long term Short term Long term Inner threading without MH

Weight

• with MH
• 1,400 2,100 3,100
• 700 1,050 1,500
• 300 500 800
• 150 250 400

0.75 2 3

10 12 20

15 40 50

• 4.2 7.6 12,8

Dimensions [mm] Part number

• pivot angle

Right-hand

Left-hand

• thread
• thread
• without MH with MH

KCRM-06

KCLM-06

M06 SW10

KCRM-08 KCRM-10

KCLM-08 KCLM-10

08 10

24 30

M08 SW13 M10 SW15

12,0 14,0

12,2 14,2

9 10,5

36 43

17 22

48 58

35° 35°

± 0,2

Rod ends can be ordered in metric dimensions with metal insert with the addition of MH after the part numbers listed here Part numbern,

• e. g.

KCRM-10 MH (Inner-Ø: 10 mm).

Spherical ball material to choose RKM: Low Cost

• delivery from stock time

page 653 JKM: Low moisture absorption

W300: standard spherical bearing with metal sleeve

prices price list online www.igus.eu/eu/kcrm

igus® GmbH Cologne  |  Phone +49 (0) 22 03-9649-145 Fax

• -334  |  [email protected]  |  www.igus.eu
• igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with male thread: KARM and KALM

Standard design

Maintenance-free,

self-lubricating High strength ander impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt,

dust and lint Corrosion- and chemical-restistant High vibration dampening capacity Suitable for rotating,

• oscillating,

and linear movements Light weight Dimensional series K according to standard DIN ISO 12240 Available with metal sleeve for higher torque

Design with metal sleeve (MH)

Technical Data Part number

• static tensile strength
• static radial load

Long term [N]

Short term [N]

Long term [N]

Outer threading [Nm]

• 100 200 300 300 400
• 50 100 150 150 200
• 15 18 20 20 22
• 0.5 2.0 5.0 3.0 6.0
• 10 12 20 20 30
• 15 40 50 50 70
• 3.9 7.1 12.5 12.5 18
• 22 25 26 26 29 32 32 34 39 46
• 6.0 12.0 17.0 17.0 20.0 25.0 25.0 25.0 45.0 85.0
• 30 35 40 40 45 55 55 60 65 70
• 70 75 110 110 150 200 200 – – –
• 18 25 34 34 45.9 58 58 86.2 99.1 160.4

Right-hand

Left-hand

• thread
• thread

Short term [N]

KARM-05

KALM-05

KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-20 M20 KARM-22 KARM-25 KARM-30

KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-20 M20 KALM-22 KALM-25 KALM-30

• 1,000 500 1,700 850 2,500 1,250 2,500 1,250 2,700 1,350 2,700 3,400 3,900 3,900 4,200 6,000 6,000 7,200 7,500 8,800
• 1,350 1,700 1,950 1,950 2,100 3,000 3,000 3,600 3,750 4,400
• 400 200 700 350 800 400 800 400 1,000 500 1,300 650 1,300 650 1,500 750 1,900 950 2,300 1,150

torque thread strength depth Thread

• 570 Lifetime calculation,

CAD files and much more support

• torque through ball

Weight

• without MH with MH
• www.igus.eu/rod-end
• igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with male thread: KARM and KALM B C1

Order key

KA…M-05

Dimension Metric Thread L'= left-hand thread R = right-hand thread Housing (male thread) Series

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 657

Dimensions [mm] Part number

Right-hand

Left-hand

• thread
• thread

KARM-05 KARM-06 KARM-08 KARM-10 KARM-10 F KARM-12 KARM-12 F KARM-14 KARM-16 KARM-16 F KARM-18 KARM-20 KARM-20 M20 KARM-22 KARM-25 KARM-30

KALM-05 KALM-06 KALM-08 KALM-10 KALM-10 F KALM-12 KALM-12 F KALM-14 KALM-16 KALM-16 F KALM-18 KALM-20 KALM-20 M20 KALM-22 KALM-25 KALM-30

• pivot angle
• without MH with MH ± 0,2

05 06 08

18 20 24

M05 M06 M08

• 6,0 7,0 9,0

8 9 12

• 8,1 9,2 12,2

33 36 42

19 21 25

42 46 55

• 30° 29° 25°
• 10 10 12 12 14 16 16 18 20 20 22 25 30
• 30 30 34 34 38 42 42 46 50 50 56 61 71

M10 M10 x 1,25 M12 M12 x 1,25 M14 M16 M16 x 1,5 M18 x 1,5 M20 x 1,5 M20 x 2,5 M22 x 1,5 M24 x 2,0 M30 x 2,0

• 10,5 10,5 12,0 12,0 13,5 15,0 15,0 16,5 18,0 18,0 20,0 22,0 25,0
• 14 14 16 16 19 21 21 23 25 25 28 31 37
• 14,2 14,2 16,2 16,2 19,2 21,2 21,2 23,2 25,3 25,3 – – –
• 48 48 54 54 61 66 66 72 78 78 84 95 112
• 28 28 32 32 36 37 37 41 45 45 48 55 66
• 63 63 71 71 79 88 88 96 104 104 112 126 147
• 25° 25° 25° 25° 25° 23° 23° 23° 23° 23° 22° 22° 22°

For rod ends with metal insert please add MH to the part number,

• e. g.

KARM-10 MH (Inner-Ø: 10 mm).

• delivery from stock time

prices price list online www.igus.eu/eu/karm

igus® GmbH Cologne  |  Phone +49 (0) 22 03-9649-145 Fax

• -334  |  [email protected]  |  www.igus.eu
• igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends,

• male thread
• 2nd generation: KARM CL B

Order key d1

KARM-06 CL

• 2nd Generation Dimension Metric Thread Housing (male thread) Series

Smooth design has no dirt traps Compensation of misalignment Light weight Excellent corrosion resistance Design with metal sleeve for higher torque strength available Left-hand thread version KALM in preparation Dimensional series K according to standard DIN ISO 12240

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 657 More spherical ball materials on request   page 653

Technical data Part number

• static tensile strength
• radial load

Short term Long term Short term Long term [N] [N] [N] [N]

KARM-06 CL KARM-08 CL KARM-10 CL KARM-12 CL

• thread depth
• torque strength
• torque through ball

Weight

Outer threading [Nm]

• without MH
• with MH

Thread [mm]

• 1,000 1,700 2,500
• 500 850 1,250
• 100 200 300

50 100 150

15 18 20

• 0.5 2.0 5.0

10 12 20

15 40 50

• 3.5 6.2 11.2

2,700

1,350

Dimensions [mm] Part number

• pivot angle
• without MH with MH ± 0,2

KARM-06 CL

40 °

KARM-08 CL KARM-10 CL KARM-12 CL

08 10 12

24 30 34

M08 M10 M12

• 9,0 10,5 12,0
• 12,0 14,0 16,0
• 12,2 14,2 16,2

42 48 54

25 28 32

55 63 71

• 35 ° 35 ° 35 °

Rod ends can be ordered in metric dimensions with metal insert with the addition of MH after the part numbers listed here Part numbern,

• e. g.

KARM-10 MH (Inner-Ø: 10 mm).

For another spherical bearing material please add J or R to the part number,

• e. g.

KARM-10 CL J.

• delivery from stock time
• prices price list online
• 572 Lifetime calculation,

CAD files and much more support

• www.igus.eu/eu/karm-cl
• www.igus.eu/rod-end

My Sketches

igus® GmbH Cologne  |  Phone +49 (0) 22 03-9649-145 Fax

• -334  |  [email protected]  |  www.igus.eu
• igubal® rod ends
• igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with female thread: EBRM and EBLM

Maintenance-free,

self-lubricating High strength under impact loads Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt,

dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating,

oscillating and linear movements Light weight Dimensional series E according to standard DIN ISO 12240 50 % higher tensile force possible due to metal inlay (only dimension 16,

more dimensions on request) For temperatures up to +200°C we recommend EBRM-HT and EBLM-HT page 578

Technical Data Part number

• static tensile strength

Right-hand

Left-hand

• thread
• thread

EBRM-04 EBLM-04 EBRM-05 EBLM-05 EBRM-06 EBLM-06 EBRM-08 EBLM-08 EBRM-10 EBLM-10 EBRM-10 F EBLM-10 F EBRM-12 EBLM-12 EBRM-12 F EBLM-12 F EBRM-15 EBLM-15 EBRM-16 EBLM-16 EBRM-16 F EBLM-16 F EBRM-17 EBLM-17 EBRM-17 F EBLM-17 F EBRM-20 EBLM-20 EBRM-20 M20 EBLM-20 M20 EBRM-25 EBLM-25 EBRM-30 EBLM-30

Short term Long term Short term Long term

• thread depth
• torque Max.

torque Weight strength through ball

Thread

Inner threading

• 800 1,300 1,500
• 400 650 750
• 100 150 200

50 75 100

7 8 8

• 0.4 0.5 1.5
• 2.0 2.0 2.5

1.8 3.2 4

• 2,000 2,300 2,300 3,300 3,300 4,800 5,000 5,000 5,300 5,300 7,200 7,200 10,000 10,500
• 1,000 1,150 1,150 1,650 1,650 2,400 2,500 2,500 2,650 2,650 3,600 3,600 5,000 5,250
• 450 500 500 550 550 800 850 850 1,100 1,100 1,800 1,800 2,600 3,000
• 225 250 250 275 275 400 425 425 550 550 900 900 1,300 1,500
• 11 13 13 14 14 18 18 18 19 19 22 22 27 33
• 5.0 15.0 6.0 20.0 15.0 25.0 20.0 15.0 30.0 27.5 60.0 60.0 115.0 130.0
• 7.0 14.0 14.0 25.0 25.0 30.0 32.0 32.0 35.0 35.0 40.0 40.0 55.0 70.0
• 6.9 11.2 11.2 17.1 17.1 28.9 32.6 32.6 42.4 42.4 65.8 65.8 125.9 184.1

Spherical ball material to choose J4VEM: clearance-free,

• preloaded
• static radial load

page 653 JEM: low moisture absorption

REM: low-cost

• 574 Lifetime calculation,

CAD files and much more support

• www.igus.eu/rod-end
• igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with female thread: EBRM and EBLM B d2

Order key

EB…M-04

Dimension Metric Thread L'= left-hand thread R = right-hand thread Housing (female thread) Series

d3 d4

Material: Housing: igumid G page 983 Spherical ball: iglidur® W300 page 657 More spherical ball materials on request   page 653

Dimensions [mm] Part number

Right-hand

Left-hand

• thread
• thread

EBRM-04 EBLM-04 EBRM-05 EBLM-05 EBRM-06 EBLM-06 EBRM-08 EBLM-08 EBRM-10 EBLM-10 EBRM-10 F EBLM-10 F EBRM-12 EBLM-12 EBRM-12 F EBLM-12 F EBRM-15 EBLM-15 EBRM-16 EBLM-16 EBRM-16 F EBLM-16 F EBRM-17 EBLM-17 EBRM-17 F EBLM-17 F EBRM-20 EBLM-20 EBRM-20 M20 EBLM-20 M20 EBRM-25 EBLM-25 EBRM-30 EBLM-30

– 11 13 16 19 19 22 22 26 – – 30 30 34 34 41 48

• 3.5 4.4 4.4 6.0 7.0 7.0 8.0 8.0 10.0 10.5 10.5 11.0 11.0 13.0 13.0 17.0 19.0
• 5 6 6 8 9 9 10 10 12 13 13 14 14 16 16 20 22
• 4 5 6 8 10 10 12 12 15 16 16 17 17 20 20 25 30
• delivery from stock time
• 15 M04 – 19 M05 9.0 21 M06 11.0 24 M08 13.0 29 M10 15.0 29 M10 x 1.25 15.0 34 M12 18.0 34 M12 x 1.25 18.0 40 M14 21.0 43 M16 – 43 M16 x 1.5 – 46 M16 24.0 46 M16 x 1.5 24.0 53 M20 x 1.5 27.0 53 M20 x 2.5 27.0 64 M24 x 2.0 34.0 73 M30 x 2.0 41.0
• pivot angle
• 22.5 9.5 30.0 SW08 30 12 39.5 SW09 30 8 40.5 SW11 36 14 48.0 SW14 43 18 57.5 SW17 43 18 57.5 SW17 50 20 67.0 SW19 50 20 67.0 SW19 61 26 81.0 SW22 64.5 26.5 86.0 SW22 64.5 26.5 86.0 SW22 67 27 90.0 SW27 67 27 90.0 SW27 77 31 103.5 SW30 77 31 103.5 SW30 94 38 126.5 SW36 110 47 146.5 SW41
• 33° 33° 27° 24° 24° 24° 21° 21° 21° 21° 21° 18° 18° 16° 16° 16° 13°

prices price list online www.igus.eu/eu/ebrm

igus® GmbH Cologne  |  Phone +49 (0) 22 03-9649-145 Fax

• -334  |  [email protected]  |  www.igus.eu
• igubal® rod ends

igubal® Rod Ends | Product Range

Rod ends with male thread: EARM and EALM

Maintenance-free,

dry-running High stiffness Very high tensile strength for varying loads Compensation of misalignment Compensation of edge loads Insensitive to dirt,

dust and lint Corrosion- and chemical-resistant High vibration-dampening capacity Suitable for rotating,

• oscillating,

and linear movements Light weight Dimensional series E according to standard DIN ISO 12240 For temperatures up to +200°C we recommend EARM-HT and EALM-HT page 579

Technical Data Part number

• static tensile strength

Right-hand

Left-hand

• thread
• thread

EARM-05 EARM-06 EARM-08 EARM-10

EALM-05 EALM-06 EALM-08 EALM-10

• static radial load

Short term Long term Short term Long term

• thread depth
• torque Max.

torque Weight strength through ball

Thread

Outer threading

• 550 850 1,600 2,600
• 275 425 800 1,300
• 50 80 160 250
• 25 40 80 125
• 14 14 17 19
• 0.4 0.5 2.0 5.0
• 2.0 2.5 7.0 14.0
• 2.2 2.7 5.1 8.4

EARM-10 F

EALM-10 F

2,600

1,300

EARM-12 EARM-12 F EARM-15 EARM-17 EARM-17 F EARM-20 EARM-20 M20 EARM-25 EARM-30

EALM-12 EALM-12 F EALM-15 EALM-17 EALM-17 F EALM-20 EALM-20 M20 EALM-25 EALM-30

• 3,100 3,100 3,400 3,600 3,600 6,800 6,800 7,000 7,000
• 1,550 1,550 1,700 1,800 1,800 3,400 3,400 3,500 3,500
• 300 300 600 900 900 1,700 1,700 1,000 2,000
• 150 150 300 450 450 850 850 500 1,000
• 20 20 24 26 26 30 30 37 46
• 6.0 6.0 12.5 17.5 21.0 25.0 25.0 45.0 85.0
• 25.0 25.0 30.0 35.0 35.0 40.0 40.0 55.0 70.0
• 14.3 14.3 21.1 30.2 30.2 57.3 57.3 94.8 156.4

Spherical ball material to choose J4VEM: clearance-free,

• preloaded

page 653 JEM: low moisture absorption

REM: Low-cost

• 576 Lifetime calculation,

CAD files and much more support

• www.igus.eu/rod-end
• igubal® rod ends

igubal® Rod Ends | Product Range Rod ends with male thread: EARM and EALM B

Order key

EA…M-05

Abmessung Met